Materials and methods of making soap
FOR THE SAKE OF THOSE THAT HAVE NOT SEEN THIS.
LIQUID SOAP PRODUCTION STEP BY STEP
LIST OF CHEMICALS USE IN THE PRODUCTION OF LIQUID SOAP ARE
1. NITROSOL
2. TEXAPON
3. SODA ASH
4. SULPHONIC ACID
5. SLS
6. CAUSTIC SODA
7. STPP
8. COLOUR
9. PERFUME
10. FOAM BOOSTER IS OPTIONAL
Add 8 litres of water to your plastic big bowl
Add 2 litres of water in another bolw and soak your SLS if the one you buy is grain type, set it aside, while it's still dissolving....
Carefully add TEXAPON into the 8 litres of water and stir immediately for about 30 seconds
Then dissolve the Nitrosol in 4 litres of water, stir vigorously for about 30 seconds and add to the TEXAPON then continue stiring it for about 30 seconds to blend together
Check if your SLS is dissolved, if yes add to the main mixture and stir for another 30 seconds
In another bolw, dissolve the soda ash and set it aside
Add SULPHONIC Acid direct to the main mixture and stir for at least 30 seconds
Add the dissolved soda ash to the mixture and keep turning for another 20 seconds
If you are using caustic soda, you can dissolve it separately and to the mixture and stir but I don't use it always
Dissolve your stpp now and add to the main mixture and continue stiring it for about 30 seconds
The next to add is foam boost if you want it
Add your desired perfume and stir for 20 seconds, and then dissolve your favourite colour and add to it and stir it till it blend
If you think your liquid soap will last longer in your hand, you can add preservatives like ctric acid, I did not list it because I don't use it.
At this point the nice smelling fragrance is all over the place, that tells you that your liquid soap is ready for use just allow the foam to settle and you are done 👍
You must be logged in to post a comment.